Table of Contents
Advertisement
Frequency setting by analog input (terminal 1, 2, 4)
(b) Method to adjust any point without application of a voltage (current) to across terminals 2 and 5 (4 and 5).
(To change from 4V (80%) to 5V (100%))
Operation
1.
Confirm the operation status indicator and
operation mode indicator
The inverter should be at a stop.
The inverter should be in the PU operation
mode.(Using
2.
Press
to choose the parameter
setting mode.
3.
Turn
until
4.
Press
to display
5.
Turn
until
appears. Set to C4 Terminal 2 frequency
setting gain.
6.
Press
to display the analog voltage
(current) value (%).
7.
Turn
to set the gain voltage (%).
"0V (0mA) equals to 0%, 5V (10V, 20mA) to
100%"
Remarks
The current setting at the instant of
turning
is displayed.
8.
Press
to set.
REMARKS
By pressing
after step 6, you can confirm the current frequency setting bias/gain setting.
It cannot be confirmed after execution of step 7.
182
)
appears.
.
(
)
Flicker...Parameter setting complete!!
Turn
to read another parameter.
Press
to return to the
Press
twice to show the next parameter (
Display
The parameter
number read
previously appears.
C0 to C7 setting
is enabled.
Terminal 2 input Terminal 4 input
Analog voltage (current)
value (%) across terminals 2 and 5
(across terminals 4 and 5)
The gain frequency is
reached when the analog
voltage (current) value across
terminals 2 and 5 (across terminals
4 and 5) is 100%.
Terminal 2 input Terminal 4 input
(Adjustment completed)
indication (step 4).
).
Advertisement
Table of Contents
