Z1 General Report; Hourly Report; Electronic Journal - Sharp XE-A207W Full Detailed Instruction Manual

■ Z1 General report
Procedure
• SD: SAVE ALL RAM (Use the selective entry)
YES: Save all the RAM data in the SD card.
NO: Not to save all the RAM data in the SD card.
• CLEAR EJ (Use the selective entry)
YES: Clear the electronic journal data
NO: Not to clear the electronic journal data
• RESET BAL GT (Use the selective entry) for XE-A217W/XE-A217B only
YES: Reset the balance GT.
NO: Not to reset the balance GT.
• RESET GT (Use the selective entry)
YES: Reset the GT.
NO: Not to reset the GT.
■ Hourly report
You can program the memory type and the starting time for the hourly report.
Procedure
■ Electronic Journal
Procedure
• X DATA STORE (Use the selective entry)
When the X report data in the EJ is recorded:
HEADER: Record only the header of X report in the electronic journal.
DETAIL: Record the detail of X report in the electronic journal.
Program each item as follows:
• SD: SAVE SALES (Use the selective entry)
YES: Save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
• SD: SAVE EJ (Use the selective entry)
YES: Save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
Program each item as follows:
• MEMORY TYPE (Use the selective entry)
30MIN: Selects the 30-minute type.
60MIN: Selects the 60-minute type.
• START TIME (Use the numeric entry)
Starting time entry (max. 2 digits: 0 to 23)
Program each item as follows:
• STORE TO SD (Use the selective entry)
When the EJ data is recorded on the SD card:
AS IS: Control characters are recorded as they are
W SPACE: Control characters are recorded as double space.
• TR DATA STORE (Use the selective entry)
YES: Record the EJ data in the training mode.
NO: Not to record the EJ data in the training mode.
99