Sharp XE-A207W Full Detailed Instruction Manual page 125

Paper positioning guides
4.
Feed the end of the paper along with the paper positioning
guides as per the diagram.
5.
While holding down the paper, slowly close the print roller
arm.
If the print roller arm is not securely locked, printing
NOTE
is not done right. If this problem occurs, open the
arm, and close the arm as instructed above.
6.
Cut off the excess paper and replace the printer cover.
7.
Press the r key to make sure the paper end comes
out of the printer cover and clean paper appears.
If the paper end does not come out, open the
NOTE
printer cover, and pass the paper end between
the paper cutter and the paper guide of the printer
cover, and replace the printer cover.
125