Function Selection - Sharp XE-A207W Full Detailed Instruction Manual

■ Function Selection
Your register enables you to select various functional selections.
Procedure
The screen continues.
• GLU CLK CHECK (Use the selective entry) for XE-A217W/XE-A217B only
Checking of the clerk, when GLU reorder is made.
YES: Enable to check of the clerk
NO: No checking
• SPLIT COUNT (Use the selective entry)
Count method of split pricing entry.
PACKAGE: Unit of the package
QUANTITY: Quantity
• CR IN RA/PO (Use the selective entry)
Credit totalizer update if RA or PO finalization by the credit key.
NON: Not update
UPDATE: Update
• VD MODE TO HOURLY (Use the selective entry)
YES: Enable to add to the hourly total in void mode.
NO: Disable to add to the hourly total in void mode.
• ST BEFORE DIRECT (Use the selective entry)
Subtotal entry before direct non-tendering finalization
NOT: Not to require entry of subtotal for the non-tendering finalization
MUST: Require entry of subtotal for the non-tendering finalization
• ST BEFORE TEND (Use the selective entry)
Subtotal entry before tender
NOT: Not to require entry of subtotal for the tendering finalization
MUST: Require entry of subtotal for the tendering finalization
• NS RECEIPT (Use the selective entry)
Printing the receipt at the time of No Sale
PRINT: Print the receipt
NOT: Not to print the receipt
Program each item as follows:
• LV.SFT MODE (Use the selective entry) for XE-A217W/XE-
A217B only
LIMITED: Allowed only in the Manager mode.
PUBLIC: Allowed in the REG mode and the Manager mode.
• LV.SFT TYPE (Use the selective entry) for XE-A217W/XE-
A217B only
AUTO: Automatic return mode
MANUAL: Lock shift mode
• RETURN TO L1 (Use the selective entry) for XE-A217W/XE-
A217B only
When the PLU level shift system is set to "AUTO," the PLU
level can be returned to level 1 by one of the following
methods:
BY ITEM: Returns the PLU level to level 1 by one item.
RECEIPT: Returns the PLU level to level 1 by one receipt.
• GLU# ENTRY (Use the selective entry) for XE-A217W/XE-
A217B only
AUTO: Assign GLU code in an automatic serial number
MANUAL: Require manual GUL code entry
92