Cid (Cash In Drawer); Chk/Cg (Check Change) - Sharp XE-A207W Full Detailed Instruction Manual

■ PO
You can program an upper limit amount and description for paid-out key.
Procedure
■ CID (Cash in drawer)
You can program the description and the upper limit amounts for cash in drawer (sentinel).
Procedure
■ CHK/CG (Check change)
You can program the description and the upper limit amounts for check change.
Procedure
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99
NOTE
In the initial programming, the HALO function is programmed as
"INVALID".
• TEXT (Use the character entry)
Description for the paid-out key. Up to 12 characters can be
entered.
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 99999999.99
NOTE
• In the initial programming, the HALO function is programmed as
"INVALID".
• When the cash in drawer amounts exceeds a limit amount, the
sentinel mark(X) will be displayed.
• TEXT (Use the character entry)
Description for the cash in drawer. Up to 12 characters can be
entered.
Program each item as follows:
• HALO (High Amount Lockout) (Use the numeric entry)
This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99
NOTE
In the initial programming, the HALO function is programmed as
"INVALID".
• TEXT (Use the character entry)
Description for check change. Up to 12 characters can be
entered.
74