Z Counter; Z1 General Report - Sharp XE-A207W Full Detailed Instruction Manual

• GT1 ON X (Use the selective entry)
YES: Print GT1 on the X report.
NO: Not to print GT1 on the Z report.
• GT2 ON X (Use the selective entry)
YES: Print GT2 on the X report.
NO: Not to print GT2 on the X report.
• GT3 ON X (Use the selective entry)
YES: Print GT3 on the X report.
NO: Not to print GT3 on the X report.
• TR GT ON X (Use the selective entry)
YES: Print the training GT on the X report.
NO: Not to print the training GT on the X report.
• VD MODE ON X1Z1 (Use the selective entry)
YES: Print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
• VD MODE ON X2Z2 (Use the selective entry)
YES: Print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
• PLU DATA ON Z
YES: Print PLU data on the PLU Z report.
NO: Not to print PLU data on the PLU Z report.
• EJ DATA ON Z
YES: Print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
• EJ SIZE
SMALL: Print EJ in a small size.
NORMAL: Print EJ in a normal size.
■ Z Counter
GENERAL Z1: Max.4 digits (0000 to 9999)
GENERAL Z2: Max.4 digits (0000 to 9999)
■ Z1 General report
• SD: SAVE SALES (Use the selective entry)
YES: Save the sales data in the SD card.
NO: Not to save the sales data in the SD card.
• SD: SAVE EJ (Use the selective entry)
YES: Save the electronic journal data in the SD card.
NO: Not to save the electronic journal data in the SD card.
• SD: SAVE ALL RAM (Use the selective entry)
YES: Save the all RAM data in the SD card.
NO: Not to save the all RAM data in the SD card.
• Clear EJ
YES: Clear the electronic journal data in the SD card
NO: Not to clear the electronic journal data in the SD card
• RESET BAL GT (Use the selective entry) for XE-A217W/XE-A217B only
YES: Reset the balance GT
NO: Not to reset the balance GT
98