Z Counter - Sharp XE-A207W Full Detailed Instruction Manual

• GT1 ON X (Use the selective entry)
YES: Print GT1 on the X report.
NO: Not to print GT1 on the X report.
• GT2 ON X (Use the selective entry)
YES: Print GT2 on the X report.
NO: Not to print GT2 on the X report.
• GT3 ON X (Use the selective entry)
YES: Print GT3 on the X report.
NO: Not to print GT3 on the X report.
• TR GT ON X (Use the selective entry)
YES: Print the training GT on the X report.
NO: Not to print the training GT on the X report.
• VD MODE ON X1Z1 (Use the selective entry)
YES: Print total of VOID MODE on X1Z1 report
NO: Not to print total of VOID MODE on X1Z1 report
• VD MODE ON X2Z2 (Use the selective entry)
YES: Print total of VOID MODE on X2Z2 report
NO: Not to print total of VOID MODE on X2Z2 report
• PLU DATA ON Z (Use the selective entry)
YES: Print PLU data on the PLU Z report.
NO: Not to print PLU data on the PLU Z report.
• EJ DATA ON Z (Use the selective entry)
YES: Print EJ data on the EJ Z report.
NO: Not to print EJ data on the EJ Z report.
• EJ SIZE (Use the selective entry)
SMALL: Print EJ in a small size.
NORMAL: Print EJ in a normal size.
■ Z Counter
Procedure
Program each item as follows:
• GENERAL Z1: Max.4 digits (0000 to 9999)
• GENERAL Z2: Max.4 digits (0000 to 9999)
98