Programming; Basic Instructions; Programming Screen - Sharp XE-A207W Full Detailed Instruction Manual

a

Programming

This chapter explains how to program various items.
Before you start programming, press the
by using the I key and press the
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
■ Programming screen
Opening screen: When you select the "6 PGM MODE", your display will show a programming opening
screen corresponding to the mode you selected.
Code selecting screen (Dept. PLU):

Programming screen:

j key and select the "6 PGM MODE" or "7 SD CARD MODE"
A key.
Mode you are in
Programming menu: Use the cursor keys or numeric key to select
Numeric entry and status information area
Selected menu
Code number and its description
(In case of PLU, two lines are used for one code, upper line -
code, lower line - description.)
Use the cursor keys or numeric keys to select an option, and
press the A key.
Numeric entry and status information area
Selected code
Setting items:
Use the cursor keys to select an item.
To select an option, follow the instruction shown below.
Numeric entry:
Character entry: Use character keys
Selective entry: Press
64
an option, and press the
Use numeric keys
.
key to toggle options or press the
z key to show the option list. Use the
cursor keys to move the cursor and press the
z or A key to select it.
A key.