Table of Contents
Advertisement
TRENDnet User's Guide
o
Replace – Replaces the packet when an Option 82 packet is passed
through the switch
o
Keep – Keeps the Option 82 packet when it passed through the switch
o
Drop – Drops the Option 82 packet when it is passed through the
switch
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
LLDP (Link-Layer Discovery Protocol)
Link Layer Discovery Protocol (LLDP) allows Ethernet network devices, such as switches
and routers, to receive and transmit device-related information to directly connected
devices on the network and to store data that is learned about other devices.
Enable and configure LLDP
LLDP > LLDP Global Settings
1. Log into your switch management page (see
on page 11).
2. Click on LLDP and click on LLDP Global Settings.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management
page"
3. Review the settings.
Enabling or Disabling LLDP
From the LLDP parameter, select one of the following radio button choices and
click Apply to save the settings.
Enable: The LLDP feature is active.
Disable: The LLDP feature is inactive.
Configure the LLDP Settings
Message TX Hold Multiplier: Sets the hold multiplier value. The hold time multiplier is
multiplied by the transmit interval to give the Time To Live (TTL) that the switch
advertises to the neighbors. The range is from 2 to 10.
Message TX Interval: Sets the transmit interval, which is the interval between regular
transmissions of LLDP advertisements. The range is from 5 to 32762 seconds.
LLDP Reinit Delay: Sets the re-initialization delay, which is the number of seconds that
must elapse after LLDP is disabled on a port before it can be reinitialized. The range is
from 1 to 10 seconds.
LLDP TX Delay: Sets the value of the transmission delay timer, which is the minimum
time interval between transmissions of LLDP advertisements due to a change in LLDP
local information. The range is from 1 to 8192 seconds.
Click Apply to save the settings.
TEG-30102WS
87
Advertisement
Table of Contents
