Link Layer Discovery Protocol (Lldp) - TRENDnet TI-PG1284i User Manual

TRENDnet User's Guide
LACP Info.
Advanced Settings > Link Aggregation > LACP Info.
Parameter Description
Group ID Select a LACP group that you want to view.
Neighbors Information
Port The LACP member port ID.
LACP system priority is used to determine link aggregation group
System Priority (LAG) membership, and to identify this device to other switches
during LAG negotiations. (Range: 0-65535; Default: 32768)
System ID The neighbor Switch's system ID.
Port The direct connected port Id of the neighbor Switch.
The available time period of the neighbor Switch LACP
Age
information.
Port State The direct connected port's state of the neighbor Switch.
Port Priority The direct connected port's priority of the neighbor Switch.
Oper Key The Oper key of the neighbor Switch.
Internal Information
© Copyright 2016 TRENDnet. All Rights Reserved.
Port The LACP member port ID.
Port Priority The port priority of the LACP member port.
Admin Key The Admin key of the LACP member port.
Oper Key The Oper key of the LACP member port.
Port State The port state of the LACP member port.

Link Layer Discovery Protocol (LLDP)

The Link Layer Discovery Protocol (LLDP) specified in this standard allows stations
attached to an IEEE 802® LAN to advertise, to other stations attached to the same IEEE
802 LAN, the major capabilities provided by the system incorporating that station, the
management address or addresses of the entity or entities that provide management of
those capabilities, and the identification of the station's point of attachment to the IEEE
802 LAN required by those management entity or entities.
The information distributed via this protocol is stored by its recipients in a standard
Management Information Base (MIB), making it possible for the information to be
accessed by a Network Management System (NMS) using a management protocol such
as the Simple Network Management Protocol (SNMP).
Default Settings
The LLDP on the Switch is disabled.
Tx Interval : 30 seconds.
Tx Hold : 4 times.
Time To Live : 120 seconds.
Port Status Port Status
---- ------- ---- -------
1 Enable 2 Enable
TI-PG1284i
91