Enable Or Disable Snmp And Modify Idle Timeout Settings - TRENDnet TEG-30102WS User Manual

TRENDnet User's Guide
.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.

Enable or disable SNMP and modify idle timeout settings

System > User Interface
This section explains how to enable SNMP on the switch and modify the switch
management page idle timeout settings.
Note: If you disable the SNMP on the switch, the switch will not be manageable via
SNMP using MIBs.
1. Log into your switch management page (see
on page 11).
2. Click on System, and click on User Interface.
3. Review the settings. Click Apply to save changes.
© Copyright 2018 TRENDnet. All Rights Reserved.
"Access your switch management page"

SNMP Agent: Click the drop-down list to one of the following options.
o
Enabled - When you enable this parameter, the SNMP agent is active.
You can manage the switch with SNMP network management
software and the switch's private MIB.
o
Disabled - When you enable this parameter, the SNMP agent is
inactive.

Telnet Agent: Click the drop-down list to one of the following options
o
Enabled – When you enable this parameter, the Telnet agent is active.
You can manage the switch remotely with Telnet network
management.
o
Disabled – when you enable this parameter, the Telnet agent is
inactive.

SSH Agent: Click the drop-down list to one of the following options.
o
Enabled – When you enable this parameter, the SSH agent is active.
You can manage the switch with SSH-agent helper program and the
switches private MIB.
o
Disabled – when you enable this parameter, the SSH agent is inactive.

Web Server Status – Displays the current SNMP status.

Web Idle Timeout - Enter the idle period in minutes, when the switch will
automatically log out a user from the switch management page.
TEG-30102WS
21