Copying Scene Data - Omron F160 Operation Manual

Changing Scenes and Scene Groups
CHECK
4-2-2

Copying Scene Data

CHECK
74
2. Display the Basic Screen for Monitor Mode or Run Mode.
3. Move the cursor to Scn and press the ENT Key.
The Scn 0 to Scn 7 options will be displayed.
0.Scn 0 MON
0.Scn 0
1.Scn 1
2.Scn 2
3.Scn 3
4.Scn 4
5.Scn 5
6.Scn 6
7.Scn 7
S+ENT:Help S+→:Adjust
↑ ↓
S+ESC:Set disp
S+ESC:Edit S+ENT:Scn Group
4. Press the SHIFT+ENT Keys.
The Scene Group 0 to Scene Group 7 options will be displayed.
Use the Down Key to display scene group numbers 8 to 31.
Scn Group select
0.Scn Group 0
1.Scn Group 1
2.Scn Group 2
3.Scn Group 3
4.Scn Group 4
5.Scn Group 5
6.Scn Group 6
7.Scn Group 7
↑ ↓
S+ESC:Edit
5. Move the cursor to the scene group number to be switched to and press
the ENT Key.
The selected scene group will be displayed.
When scene groups 1 to 31 are switched to, a directory called "DEFSCN-
GR" will be automatically created in the root directory of the Memory Card.
The scene group data will be saved in files called "SGR_00**.SGR." The
asterisks (*) are the scene number.
This function is useful for creating new scenes by copying scene data from
another scene and changing some settings to suit the new requirements.
Scene data can be copied only within the same scene group. To copy data
between scene groups, copy the whole scene group. Refer to page 77.
---- ---ms
Freeze
Section 4-2