Omron F160 Operation Manual page 100

Checking I/O Status with External Devices
CHECK
Changing Test Character String and Echo Back
SeeAlso
The Serial I/O Monitor Screen will be displayed.
Serial I/O monitor
[SO]TEST STRING
[S I ]RECEIVE TEST
[SO]RECEIVE TEST
TRIG:Test S+ENT:Settings
Display Details
Display
SO Output to external device.
Press the TRIG Key once to send a test character string "TEST
STRING" from the F160 to the external device. The contents of the test
character string can be changed. Refer to page 91.
SI Input from external device. If more than 26 characters are received,
only the first 26 characters will be displayed.
If Echo back is set to ON, the received data will be returned as is to the
external device. Refer to page 91.
6. Press the ESC Key to exit this screen.
The screen in (5.) will return.
1. Display the Serial I/O Monitor Screen and press the SHIFT+ENT Keys.
The screen for making detailed settings will be displayed.
Echo back : ON
Test string : [TEST STRING]
End
2. Select ON or OFF for Echo back.
3. Move the cursor to the square brackets [ ] and press the ENT Key.
The software keyboard will be displayed.
Test string :
[TEST STRING ]
A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n
o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9 . - -
( ) ^ `
# $ %
SPC DEL BS INS ← →
ENT:Select
Refer to page 20 for details on inputting characters.
4. Change the test string. Up to 12 characters can be inserted.
5. Select END and the screen in (2.) will return.
6. Move the cursor to End and press the ENT Key.
Meaning
!
END
Ins.
Section 4-5
91