Table of Contents
Advertisement
f Change your password periodically.
f Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your
password in case you receive such inquiries.
f The connecting network must be secured by a firewall, etc.
DIGITAL LINK
"DIGITAL LINK" is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic to the HDBaseT
HDBaseT Alliance.
This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G,
ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the "XTP
transmitter" of Extron Electronics) that use the same HDBaseT
that the operation has been verified with this projector, visit the Panasonic website (https://panasonic.net/cns/
projector/). Note that the verification for devices of other manufacturers has been made for the items set by
Panasonic Corporation, and not all the operations have been verified. For operation or performance problems
caused by the devices of other manufacturers, contact the respective manufacturers.
Art-Net
"Art-Net" is an Ethernet communication protocol based on the TCP/IP protocol.
By using the DMX controller and the application software, illumination and stage system can be controlled. Art-Net
is made based on DMX512 communication protocol.
Application software supported by the projector
The projector supports following application software. For details or downloading each application software, visit
the Panasonic website (https://panasonic.net/cns/projector/).
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display)
connected to an intranet.
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
notifies of abnormality of such equipment and detects the signs of possible abnormality. "Early Warning
Software" is preinstalled in the "Multi Monitoring & Control Software". To use the early warning function of
this plug-in software, install "Multi Monitoring & Control Software" in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the "Multi Monitoring & Control Software" into a PC. To continuously use after the 90
days, it is necessary to purchase the license of "Early Warning Software" (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of "Multi Monitoring & Control Software".
Storage
To store the projector, store in a dry room.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.
Cautions on use
r To get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
20 - ENGLISH
Chapter 1 Preparation — Precautions for use
TM
communication standard formulated by
TM
standard. For the devices of other manufacturers
Advertisement
Chapters
Table of Contents
