Table of Contents
Advertisement
Switching the input by displaying the input selection screen
The input for projection can be selected by displaying the input selection screen using the <INPUT SELECT>
button on the control panel.
1)
Press the <INPUT SELECT> button on the control panel.
f The input selection screen is displayed.
2)
Press as to select the input for projection, and press the <ENTER> button.
Note
f The input can also be switched by pressing the <INPUT SELECT> button while the input selection screen is displayed.
The input will switch each time you press the <INPUT SELECT> button.
f If the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, the input
selection menu for the DIGITAL LINK output supported device is displayed when the <ENTER> button is pressed while the DIGITAL LINK
input is selected in the input selection screen.
f If the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, the DIGITAL
LINK logo and the input name selected in the DIGITAL LINK output supported device are displayed in the display section of the [DIGITAL
LINK] in the input selection screen.
Adjusting the image
Adjust the position, size, and focus of the projected image.
1)
Adjust the projection angle.
f Install the projector on a flat surface so that the front of the projector is parallel to the screen surface,
making the projected image rectangular.
f If the projector is tilted downward than the screen, extend the adjustable feet so that the projected image
becomes rectangular.
f Refer to "Adjusting adjustable feet" ( x page 50) for details.
2)
Turn the lens shift lever counterclockwise and release the fixing of the lens shift lever.
3)
Adjust the lens shift. (Fig. 1)
f Adjust the position of the projected image by operating the lens shift lever.
f Refer to "Adjustment range by the lens position shift (optical shift)" ( x page 50) for details.
Chapter 3 Basic Operations — Projecting
INPUT SELECT
COMPUTER1
COMPUTER2
VIDEO
HDMI1
HDMI2
DIGITAL LINK
SELECT
SET
ENTER
Lens shift lever
Fig. 1
Focus ring
Zoom ring
Fig. 2
ENGLISH - 49
Advertisement
Chapters
Table of Contents
