Table of Contents
Advertisement
7
[E-MAIL ADDRESS 1], [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent. Leave [E-MAIL ADDRESS 2]
blank when two E-mail addresses are not to be used.
8
Settings of the conditions to send E-mail
Select the conditions to send E-mail.
[MAIL CONTENTS]:
Select either [NORMAL] or [SIMPLE].
[ERROR]:
Send an E-mail when an error occurred in the self-diagnosis.
[INTAKE AIR TEMPERATURE]:
Send an E-mail when the intake air temperature has reached the
[Authentication set up] page
Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.
Click [Detailed set up] → [Authentication set up].
1
[Auth]
Select the authentication method specified by your Internet
service provider.
2
[SMTP Auth]
Set when the SMTP authentication is selected.
3
[POP server name]
Enter the POP server name.
Allowed characters:
Alphanumerics (A - Z, a - z, 0 - 9)
Minus sign (-) and period (.)
4
[User name]
Enter the user name for the POP server or the SMTP server.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
Chapter 5 Operations — Web control function
Network security
Crestron tools
7
8
value set at the above field.
[PERIODIC REPORT]:
Place a check mark on this to send an E-mail periodically.
It will be sent on the days and time with the check mark.
9
[Submit]
Update the settings.
Network security
Crestron tools
5
[Password]
Enter the password for the POP server or the SMTP server.
6
[SMTP server port]
Enter the port number of the SMTP server.
(Normally 25)
7
[POP server port]
Enter the port number of the POP server.
(Normally 110)
8
[Submit]
Update the settings.
Network security
Crestron tools
1
2
3
4
5
6
7
8
ENGLISH - 143
7
8
9
Advertisement
Chapters
Table of Contents
