Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual) page 164

Problems
Video from HDMI
compatible device does
not appear or it appears
jumbled.
Cannot control the
projector with Art-Net.
The DIGITAL LINK input
image is not displayed.
Attention
f If problems persist even after checking the preceding points, consult your dealer.
164 - ENGLISH
Chapter 6 Maintenance — Troubleshooting
f Is the HDMI cable connected securely?
f Turn the power of the projector and the external device off and on.
f Is a signal which is not compatible with the projector being input?
f Are the connections between the twisted-pair-cable transmitter and an external
device, and between the twisted-pair-cable transmitter and projector correctly done?
f Is [Art-Net SETUP] set to other than [OFF]?
f Are [NET], [SUB NET], [UNIVERSE], and [START ADDRESS] set correctly?
f Is the cable compatible to the condition of the projector used?
f Are the connections between the twisted-pair-cable transmitter and an external
device, and between the twisted-pair-cable transmitter and projector correctly done?
f Is [DIGITAL LINK MODE] set to [AUTO], [DIGITAL LINK], or [LONG REACH]? Is it
set to [ETHERNET]?
f Is a signal which is not compatible with a twisted-pair-cable transmitter being input?
Points to be checked Page
34
―
179
―
128
128
36
―
120
―