Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual) page 141

[Adjust clock] page
Click [Detailed set up] → [Adjust clock].
1 [Time Zone]
Select the time zone.
2 [Set time zone]
Updates the time zone setting.
3 [NTP SYNCHRONIZATION]
Set [ON] when adjusting the date and time automatically.
4 [NTP SERVER NAME]
Enter the IP address or server name of the NTP server when you
Note
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
[Ping test] page
Check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
1 [Input IP address]
Enter the IP address of the server to be tested.
2 [Submit]
Executes the connection test.
[Network security] page
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Click [Detailed set up] → [Network security].
Chapter 5 Operations — Web control function
Crestron tools
Network security
Crestron tools
Network security
set to adjust the date and time manually.
(To enter the server name, the DNS server needs to be set up.)
5 [Date]
Enter the date to be changed.
6 [Time]
Enter the time to be changed.
7 [Submit]
Updates the date and time settings.
1
2
3 Example of display when the connection has succeeded
4 Example of display when the connection has failed
1
2
3
4
5
6
7
3
4
ENGLISH - 141