Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual) page 43

Chapter 3 Basic Operations — Switching on/off the projector
2) Press as to select [SCREEN POSITION].
3) Press qw to adjust.
4) Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1) Press qw to switch the setting.
2) Press the <ENTER> button to proceed to the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [DATE AND TIME].
INITIAL SETTING
16:10
SCREEN FORMAT
SCREEN POSITION
Set as necessary for the screen in use.
CHANGE
SET
ENTER
INITIAL SETTING
16:9
SCREEN FORMAT
0
SCREEN POSITION
Set as necessary for the screen in use.
MENU SELECT CHANGE
SET
ENTER
INITIAL SETTING
TIME ZONE +09:00
LOCAL DATE 20XX/01/01
LOCAL TIME 12：34：56
Please set up a time zone according to
the area of your country or region.
CHANGE
SET
ENTER
4/6
4/6
5/6
ENGLISH - 43