Table of Contents
Advertisement
When [CONSTANT MODE] is set to [PC]
1
Display the name of the projector.
2
Display the synchronized group.
3
Display the IP address of the projector.
4
Display the names and IP addresses of projectors in same group detected over the network.
5
Display the status by color.
Green: There is an allowance for brightness correction.
Yellow: There is little allowance for brightness correction.
Red: There is a brightness control error.
6
Display error detailed messages.
7
Display error messages.
When the message [Failed to apply BRIGHTNESS CONTROL to some projectors.] appears, it means that synchronization with the
projector displayed in red has failed.
Press as to select the projector displayed in red, and press the <ENTER> button to display the error details.
8
Update to the latest status information.
r Error details
Error message
[Exceed maximum number of
projectors.]
[Please check the COMMAND
CONTROL setting.]
[Please check the USER NAME
and PASSWORD in the COMMAND
CONTROL setting.]
[Cannot apply BRIGHTNESS
CONTROL. Please check projector
status.]
[Brightness Sensor Error]
Note
f If the synchronized projectors are not displayed in the list, check the following:
Chapter 4 Settings — [PROJECTOR SETUP] menu
BRIGHTNESS CONTROL STATUS
LINK
PROJECTOR
1:
PROJECTOR2
2:
PROJECTOR3
3:
4:
5:
6:
7:
UPDATE
MENU SELECT
BRIGHTNESS CONTROL STATUS
CONSTANT MODE
PROJECTOR
RETURN
MENU
f Limit the number of projectors in one group to eight.
f To synchronize nine or more projectors, use a PC and the dedicated software "Multi Monitoring &
Control Software".
f Set the password of the administrator account.
f Set [NETWORK CONTROL] → [COMMAND CONTROL] to [ON] for the projector in error.
f Set [NETWORK CONTROL] → [COMMAND PORT] of all projectors to be linked to the same value.
f Set the same administrator account (user name and password) for all linked projectors.
f The projector is in standby. Switch on the power.
f There is a problem with the brightness sensor. If problems persist even after switching on the
power, consult your dealer.
1
GROUP A
2
3
192. 168. 30. 2
192. 168. 30. 3
192. 168. 30. 4
4
5
7
8
PC
5
1
6
Measures to take
ENGLISH - 101
Advertisement
Chapters
Table of Contents
