Vivotek Network Camera FD7141(V) User Manual page 96

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
daylight_enable
daylight_dstactualmode
daylight_auto_begintime
daylight_auto_endtime
updateinterval
restore
reset
restoreexceptnet
96 - User's Manual
<boolean> 6/6
<boolean> 6/7
string[19] 6/7
string[19] 6/7
0, 6/6
3600,
86400,
604800,
2592000
0, 7/6
<positive integer>
0, 7/6
<positive integer>
<Any value> 7/6
Krasnoyarsk
320: GMT 08:00 Beijing, Chongging,
Hong Kong, Kuala Lumpur, Singapore,
Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is.,
New Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
enable automatic daylight saving to time
zone
check if current time is under daylight
saving time.
display the current daylight saving begin
time.
(product dependent)
display the current daylight saving end
time.
(product dependent)
0 to Disable automatic time adjustment,
otherwise, it means the seconds between
NTP automatic update interval.
Restore the system parameters to default
value after <value> seconds.
Restart the server after <value> seconds
if <value> is non-negative.
Restore the system parameters to default
value except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When