Ready To Use; Adjusting The Lens - Vivotek Network Camera FD7141(V) User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Ready to use

1� Access to the Network Camera from the Internet�
2� Retrieve live video through web browsers or recording software�
Please refer to page 16 for detailed information�
http://192.168.5.109/index.html

Adjusting the Lens

Based on the live image retrieved from the camera, adjust the camera lens by doing the
following:
To adjust the viewing angle
1. Loosen the pan screw and then turn the lens module left and right. Upon completion, tighten
the pan screw�
2� Loosen the tilt screws on both side of the camera and then turn the lens module up and down�
Upon completion, tighten the tilt screws.
3� Loosen the image adjustment screw and then turn the lens to adjust the image orientation�
Upon completion, tighten the image adjustment screw.
Loosen
Pan 350°
14 - User's Manual
1
Tighten
Loosen
2
Tighten
Tilt 95°
Rotate the screw
Turn the lens
Loosen
3
Tighten
Rotate 350°