Vivotek Network Camera FD7141(V) User Manual page 77

Video clip: Select to send video clips when a trigger is activated�
■ Source: Select to record video clips from stream 1 or stream 2.
■ Pre-event recording
The Network Camera has a buffer area; it temporarily holds data up to a certain limit� Enter a number
to decide how many seconds for video clips recording before a trigger is activated� Up to 9 seconds
can be set�
■ Maximum duration
Specify the maximal recording duration in seconds. Up to 10 seconds can be set.
For example, if the Pre-event recording is set to five seconds and the Maximum duration is set to ten
seconds, the Network Camera continues to record for another 4 seconds after a trigger is activated.
■ Maximum file size
Specify the maximal file size allowed.
■ File Name Prefix
Enter the text that will be put in front of the file name.
For example:
Video_20080104_100341
File name prefix
Click Save to enable the settings, and then click Close to quit the page�
System log: Select to send a system log when a trigger is activated�
Click Save to enable the settings, and then click Close to quit the page�
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
1 sec. 2 sec. 3 sec. 4 sec. 5 sec. 6 sec.
The moment the trigger
is activated.
Date and time suffix
The format is: YYYYMMDD_HHMMSS
7 sec. 8 sec. 9 sec. 10 sec.
User's Manual - 77