VIVOTEK - A Leading Provider of Multimedia Communication Solutions
A green bar indicates that even though motions are detected, the event will not be triggered because the
image variations are still falling under the defined threshold.
Percentage = 30%
If you want to configure another motion detection setting for day/night/schedule mode, please click
Profile to open Motion Detection Profile Settings page as below� A total of three motion detection
windows can be configured on this page, too.
Video(TCP-AV)
Please follow the steps beolw to setup a profile:
1� Create a new motion detection window�
2� Check Enable this profile�
3. Select the applied mode: Day mode, Night mode, or schedule mode. Please manually enter a range of
time if you choose Schedule mode�
4� Click Save to take effect and then click Close to quit the page�
This motion detection window will also show up on the Event Settings page. You can go to Application >
Event Settings > Trigger to choose it as a trigger source� Please refer to page 69 for detailed information�
User's Manual - 61