Vivotek Network Camera FD7141(V) User Manual page 53

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
17:08:56 2008/06/25
Advanced mode
Image Settings
Click Image settings to open the Image Settings page. In this page, you can tune White balance,
Brightness, Saturation, Contrast, and Sharpness for video compensation.
White balance: Adjust the value for best color temperature�
■ Auto
The Network Camera automatically adjusts the color temperature of light in response to different light
sources� The white balance setting defaults to Auto and works well in most situations�
■ Keep current value
Follow the steps below to manually set the white balance to compensate for the ambient lighting
conditions�
1� Set the White balance to Auto and click Save�
2� Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color
temperature automatically�
3. Select Keep current value to confirm the setting while the white balance is being measured.
4� Click Save to take effect�
User's Manual - 53