Server Settings - Vivotek Network Camera FD7141(V) User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Server Settings

Click Add Server on Event Settings page to open the server setting page. In this page, you can specify
where the notification messages will be send when a trigger is activated. A total of 5 server settings can
be configured.
Server name: Enter a descriptive name for the server setting�
Server Type
There are four choices of server types available: Email, FTP, HTTP, and Network storage. Select the item
to display the detailed configurations. You can configure either one or all of them.
Email: Select to send the media files via Email when a trigger is activated.
■ Sender email address: Enter the email address of the sender.
■ Recipient email address: Enter the email address of the recipient.
■ Server address: Enter the domain name or IP address of the email server.
■ User name: Enter the user name of the email account if necessary.
■ Password: Enter the password of the email account if necessary.
To verify if the email settings are correctly configured, click Test. The result will be shown in a pop-up
window. If it works, you will also receive an email indicating the result.
If your SMTP server requires a secure connection (SSL), check This server requires a secure
connection (SSL).
Click Save to enable the settings, and then click Close to quit the page�
User's Manual - 73