Vivotek Network Camera FD7141(V) User Manual page 115

enable
priority
delay
trigger
di
mdwin
mdwin0
inter
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
0, 1 6/6
0, 1, 2 6/6
1~999 6/6
boot, 6/6
di,
motion,
seq,
visignal,
recnotify,
tampering
<integer> 6/6
<integer> 6/6
<integer> 6/6
1~999 6/6
To enable or disable this event.
Indicate the priority of this event.
"0" indicates low priority.
"1" indicates normal priority.
"2" indicates high priority.
Delay seconds before detect next event.
Indicate the trigger condition.
"boot" indicates system boot.
"di" indicates digital input.
"motion" indicates video motion detection.
"seq" indicates periodic condition.
"visignal" indicates video input signal loss
"recnotify" indicates space for recording media is
full
"tampering" indicates camera tampering detected
Indicate which di detected.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB
indicates DI 0.
Indicate which motion detection windows
detected.
This field is required when trigger condition is
"md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
set mdwin as 5.
Indicate which motion detection windows of
motion profile 0 detected.
This field is required when trigger condition is
"md".
One bit represents one window.
st
The LSB indicates the 1
For example, to detect the 1
set mdwin as 5.
Interval of period snapshot in minute.
This field is used when trigger condition is "seq".
window.
st rd
and 3 windows,
window.
st rd
and 3 windows,
User's Manual - 115