Vivotek Network Camera FD7141(V) User Manual page 82

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Source: Select the recording source (stream 1 or stream 2)�
Recording Schedule: Specify the recording duration�
■ Select the days on weekly basis.
■ Select the time for recording in 24-hr time format.
Destination: You can select the SD card or network storage you've setup for the recorded video files.
Folder: This blank will only show up if you select a local storage SD card for local storage� Enter the
folder name to store the media files.
Capacity: You can choose either the entire free space or limit recording size. The limit recording size
must larger than the reserved amount for cyclic recording�
File name prefix: Enter the text that will be put in front of the file name.
Enable cyclic recording: If you check this item, when the maximum capacity is reached, the oldest file
will be overwritten by the latest one� The reserved amount is reserved for cyclic recording to prevent
malfunction� This value must larger than 15 MBytes�
If you want to enable recording notification, please click
Recording notify on page 69 for detailed information�
When completed, select Enable this recording� Click Save to take effect and then click Close to quit
this page. The system begins recording and send recorded files to the Network Storage.
The new recording name will appear in the recording drop-down list on the recording page as below�
To remove a recording setting from the list, select a recording name from the drop-down list and then
click Delete�
■ Click Video: Open the Recording Settings page to modify�
■ Click ON: The Status will become
■ Click NAS: Open the recorded file list as below. For more information about folder naming rule, please
refer to page 78 for details�
82 - User's Manual
Application
OFF and stop recording�
20081120
20081121
20081122
to set up� Please refer to Trigger >