Furuno CSH5LMK2 Installation Manual page 41

Display unit
Prepare XGA monitor locally. When using MU-150HD as the display unit, see its op-
erator's manual. Connect the processor unit and display with the monitor cable 3COX-
2P-6C 5 m or 10 m (supplied). Use the MONITOR 1 port for a display unit.
NMEA input sentences
Talker Sentence
*1 GAA
*1 GLL
** GTD
LC GLC
** HDG
** HDM
** HDT
*2 VTG
VD VHW
LC RMA
*3 RMC
** DBT
** DBS
** DPT
** MTW
VD VDR
VD CUR
*1: GPS navaid, Loran-C, II (other talker), TR
*2: GPS navaid, Loran-C, II (other talker), TR, VD
*3: GPS navaid, II (other talker), TR
**: Not specified
NMEA output sentence
Talker Sentence
SS TTL
CIF input sentences
Data No.
21 DR position
24 Loran-C position
28 GPS position
54 Loran-C, TD
4: Heading (true)
41 DR ship's speed and course
44 Loran-C ship's speed and course
48 GPS ship's speed and course
57 Depth of sea bottom
58 Water temperature
66 Current indicator ship's speed and course
56 Water current, single layer
76 Water current, multi- layers
GPS position data, Ver. 2.0
Own ship position, Ver. 2.0
Own ship position (TD, LOP)
TD (Lpran-C)
Heading (compass)
Heading (magnetic bearing)
Heading (true)
Course over ground speed
Water speed, heading
Recommended minimum specific Loran-C data
Recommended minimum specific GPS data
Depth below transducer, Ver. 1.5
Depth below sea level
Depth below transducer plus offset value, Ver. 2.0
Water temperature
Water current, single layer
Water current, multi-layers
Target position (L/L)
Information
Information
Information
2. WIRING
2-15