1. MOUNTING
9. Fasten the hull unit to the retraction tank as shown below.
10. Fix anti-vibration stays to the retraction tank.
Anti-vibration stays should be fixed to directions of ship's bow - stern and port -
starboard.
1-8
M20 Nut
M20 Spring washer
M20 Flat washer
Gasket
Raise/lower
drive assembly
45°
Orient the raise/lower drive
as shown above to reduce
shock and vibration (caused
M20×80,
8 pcs.
by pitching and rolling) at the
assembly.
Fastening hull unit to retraction tank
Anti-vibration stay
Bow
Anti-vibration stay