2. WIRING
2.3.3
Connecting power cable
Fabricate the power cable DPYCY-4 (Japan Industrial Standard (JIS)) or equivalent
(local supply.)
Vinyl sheath
Note: Change connection of white wire at the TB-B1 according to ship's mains. And
then, replace the fuse appropriately. On the stickers at the terminal board and back of
the front lid of the transceiver unit, change the mark position for the used fuse.
2.3.4
How to unplug the XH connector
If making a wrong connection of XH connector, use the XH connector puller to unplug
the XH connector.
2-10
40
5
100
Armor
Fabricating of power cable
Ship's mains
100/110/115 VAC
200/220/240 VAC
TB-B1
1
2
3
4
Ship's mains
Connections at TB-B1
XH connector puller
XH connector
XH connector puller
FV5.5-4 TB-B1
1
2
Fuse
7 A 125 V
4 A 250 V
5
6
7
White