Table of Contents
Advertisement
1.2
Pre-amplifier Unit
Fix the pre-amplifier unit to the hull unit as follows:
1. Unfasten four hex. bolts (M6 12) to detach the mounting angles (2 pcs.) from the
pre-amplifier unit.
2. Fix the mounting angles onto the hull unit with M6 12 hex. bolts. Hex. bolts are
supplied with the hull unit.
3. Using the M6 12 bolts removed at step 1, fix the pre-amplifier unit to the mounting
angles.
Mounting angle (2 pcs.)
M6×12, 8 pcs.
Mounting pre-amplifier unit
1. MOUNTING
Pre-amplifier unit
1-11
Advertisement
Table of Contents
