Basic commands (function level 1)
Arm
Press and release
The alarm arms, doors lock (if connected), and the siren chirps and
lights flash once. The
Valet mode* is On the doors lock and the
tion and tone play. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the
Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the lights. The
tones play to confirm. Press the
put.
AUX/Trunk
Press and hold
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The
TRUNK RELEASE
*
See
**
See
12
ARMED
AUX
animation and tones play to confirm.
Remote and System Operations
Alarm Features
animation and beeps play to confirm. If
PANIC
or
for details.
© 2009 Directed Electronics. All rights reserved.
LOCKED (IN VALET)
animation and siren
button to stop the out-
section for details.
anima-