Remote Start Not Available - Viper 5902 Owner's Manual

Remote Start Not Available

For user safety, the system must be properly configured or remote start
will not activate. Refer to the table below for the screens and parking
light flashes that will identify the configuration issue and resolution.
Fault Message
BRAKE ON
HOOD OPEN
REMOTE START NOT AVAILABLE
If displayed after a Remote Start com-
mand:
If displayed after an Advanced Start
command it may be one of the fol-
lowing:
TOGGLE SWITCH
ALARM TRIGGERED
* Refers to the number of parking light flashes.
44
MTS mode isn't enabled
MTS mode isn't enabled
Brake is on
Hood is open
Toggle switch set
Alarm triggered
Flashes * Solution
5 Release foot brake
6 Close hood
7
Enable MTS mode
Enable MTS mode
Release foot brake
Close hood
Reset switch
Check alarm status
8 Reset switch or place shifter
in park position
Check alarm status
© 2009 Directed Electronics. All rights reserved.