Battery Information (1-Way) - Viper 5902 Owner's Manual

Remote Learning
Press the
is ready to program to the system.
Per the instruction in the Remote Pair section of this guide, follow-
ing step 4 of Placing the system into the remote pair mode. Press
and hold the
the remote has been learned.

Battery Information (1-Way)

The 1way companion remote is powered by one 3V coin cell lithium
battery (P/N CR-2032) that should last approximately one year under
normal use.
Battery Replacement
Rear View
1
Battery
Cover
clip with the positive (+) side up. Replace the battery cover. The re-
mote control is now ready for use.
52
button,3 LED flashes and beeps indicates the remote
button, the siren emits one long chirp to confirm
2
Battery
Clip
+
1. Slide the battery cover up by ap-
plying equal pressure at its top and
bottom (the arrow on the cover indi-
cates the direction), remove the cover
from the remote control housing.
2. Gently pry up on the battery to re-
move it from the holder. Insert a new
battery into the holder and under the
© 2009 Directed Electronics. All rights reserved.