Options Menu; Power Off; Parking Meter - Viper 5902 Owner's Manual

Options Menu

Power Off

Options: Power Off
With Power Off
POWER OFF
tended period of non-use is anticipated turning the power off will
preserve the battery charge.
To turn the remote on, Press and hold the menu wheel for 3 sec-
onds, the
VIPER
control is ready for normal operation. The remote also turns itself on
and begins charging when the battery charger is connected.

Parking Meter

Options: Start Meter, Parking Meter Set
The Parking Meter tracks and alerts you to the time remaining when
parked in a metered parking spot. As the metered time runs out the re-
mote control emits alerts at 15 minutes remaining (1 beep) and 5 minutes
remaining (2 beeps). At expiration the
animation and 4 beeps are played followed by an alert output of 2
beeps each minute for 10 minutes. The next button press replays the
animation and stops the alert output, a command is not performed.
Starting and Setting the Parking Meter
Toggle
1. to Parking Meter
Meter screen with current setting is displayed.
2. With Start Meter
the meter or toggle the Menu Wheel to enter the
Set field.
© 2009 Directed Electronics. All rights reserved.
highlighted, press the menu wheel, the
animation and tones play to confirm. When an ex-
animation and On tones play to confirm the remote
and press the menu wheel, the
highlighted, press the menu wheel to start
PARKING METER TIMER EXPIRED
Parking Meter
Parking
31