Netscape Navigator 4.0 or Higher
1.
Start Netscape. Click on "Edit" then "Preferences".
2.
In the "Preferences" window, click on "Advanced" then select
"Proxies". In the "Proxies" window, select "Direct connection to
the Internet".
[Use existing screenshot]
Running the Setup Wizard
1.
You can access the web-based management user interface of the
Router using the Internet browser on a computer connected to
the Router. Type "192.168.2.1" (do not type in anything else such
as "http://" or "www") in your browser's address bar. Then press
the "Enter" key.
[insert 9630_IP_Address.tif]
Note: It is strongly recommended that you use a computer
physically connected to the Router with an RJ45 cable for initial
setup. Using a wirelessly connected computer for initial setup is
not recommended.
2.
The following screen will appear in your browser to prompt you to log
in. The Router ships with no password entered. In the login screen,
leave the password blank and click the "Submit" button to log in.
[insert 9630_Login.tif]