Belkin G Plus User Manual page 34

Setting WPA-PSK+WPA2-PSK
IMPORTANT: Make sure your wireless computers are updated to work with WPA2 and have the
correct settings to get proper connection to the Router.
Configuring your Computer's Network Adapter to Use Security
Note: This section provides information on how to configure network adapter in your computers to use security.
At this point, you should already have your Wireless Router or access point set to use WPA2 or WPA or WEP. In order for you to
gain a wireless connection, you will need to set your wireless notebook card and wireless desktop card to use the same security
settings.
Belkin G Plus MIMO Network Cards feature easy-to-use Wireless Networking Utility. Simply click on your
wireless network name (SSID) from the Available Networks list and enter your Pre-Share Key (PSK). For more
information please refer to Belkin Network Card's user manual.
Most computers can also setup to work with the Router from Wireless Network Properties screen build-in your Microsoft Windows
operating system. The following are two of the examples:
Connecting your Computer to a Wireless Network that Requires a
64-Bit or 128-Bit WEP Key
1.
Double-click the "Signal Indicator" icon to bring up the "Wireless
Network" screen. The "Advanced" button will allow you to view
and configure more options of your wireless card.
2.
Under the "Wireless Network Properties" tab, select a network
name from the "Available networks" list and click "Configure".
3.
Under "Data Encryption" select "WEP".
4.
Ensure the check box "Network key is provided for me
automatically" at the bottom is unchecked. If you are using this
computer to connect to a corporate network, please consult your
network administrator if this box needs to be checked.
5.
Type your WEP key in the "Network key" box.
[use existing screenshot]
Important:
A WEP key is a mixture of numbers and letters from A–F
and 0–9. For 128-bit WEP, you need to enter 26 characters. For 64-
bit WEP, you need to enter 10 characters. This Network key needs to
match the key you assign to your Wireless Router or access point.
6.
Click "OK" to save the settings.
Connecting your Computer to a Wireless Network that Requires