Chapter 5 : Advanced Setup; Setup Wizard - Belkin BoB User Manual

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM
Step 1. How to log into the router
After you have configured TCP/IP on a client
computer, use a web browser to configure the router.
The router can be configured by any Java-supported
browser such as Internet Explorer 5.0 or above. Using
the web management interface, you may configure
the router and view statistics to monitor network.
To access the router's management interface, enter
the IP address of the router in your web browser: 10.1.1.1
Note: If you are unable to access this web
page please look at the IP setup section of the
Troubleshooting section at the back of this manual.
Type in 'admin' as the password and click login. NOTE:
Password is case sensitive.
ISP Settings
Please collect the following information from your ISP
before setting up the router:
• ISP account user name and password
• Protocol, encapsulation and VPI/VCI circuit numbers
• DNS server address
• IP address, subnet mask and default gateway (for
fixed IP users only)
Step 2. Navigating the web
browser interface ISP account user
name and password
The router's management interface consists of a
Setup Wizard and an Advanced Setup section.
Setup Wizard: Use the Setup Wizard to quickly set up
the router.
Advanced Setup: Advanced Setup supports more
advanced functions like hacker attack detection, IP
and MAC address filtering, virtual server setup, virtual
DMZ host, as well as other functions.
Note: If you would like to add any additional functions
to your router please view the Advanced Setup
table of contents in order to find the correct setup
method.
Making Configuration Changes
Configurable parameters have a dialog box or a drop-
down list. Once a configuration change has been
made on a page, most of the times you will need
to click the 'SAVE SETTINGS' or 'NEXT' button at the
bottom of the page to enable the new setting unless
there is an ' A DD' button for instance.
Note: To ensure proper screen refresh after a
command entry, be sure that Internet Explorer 5.0
and above is configured as follows: Under the menu
Tools/Internet Options/General/Temporary Internet
Files/Settings, the setting for 'Check for newer
versions of stored pages' should be 'Every visit to the
page.'
Page 7