Belkin G Plus User Manual page 17

Connection Type
From the "Connection Type" page, you can select one of these five
connection types based on the instruction provided by your ISP:
• PPPoE
• PPPoA
• Dynamic IP (1483 Bridged)
• Static IP (IPOA)
• Modem Only (Disable Internet Sharing)
Note: See Appendix C in this User Manual for some common DSL
Internet setting parameters. If you are not sure, please contact your ISP.
(1)
Select the type of connection you use by clicking the radio button
(2)
next to your connection type and then clicking "Next" .
[insert 9630_Connection_Type.tif]
(1)
(2)
Setting your ISP Connection Type to PPPoE or PPPoA
PPPoE (Point-to-Point Protocol over Ethernet) is the standard
method of connecting networked devices. It requires a user name and
password to access the network of your ISP for connecting to the
Internet. PPPoA (PPP over ATM) is similar to PPPoE, but is mostly
implemented in the UK. Select PPPoE or PPPoA and click "Next".
Then enter the information provided by your ISP, and click "Apply
Changes" to activate your settings.
[insert 9630_PPPoE.tif]