Belkin G Plus User Manual page 36

5.
For a home or small business user,
select "WPA-PSK" or "WPA2-PSK under "Network
Authentication".
Note: Select "WPA"if you are using this
computer to connect to a corporate network
that supports an authentication server such
as a radius server. Please consult your
network administrator for further information.
6.
Select "TKIP" or "AES" under "Data Encryption". This setting will have to be
identical to the Router that you set up.
7.
Type in your encryption key in the
"Network Key" box.
Important: Enter your Pre-Shared key.
This can be from eight to 63 characters
and can be letters, numbers, or symbols.
This same key must be used on all of the
clients that you set up.
8.
Click "OK" to apply settings.
Wireless Bridge
Wireless Bridging or Wireless Distribution System (WDS) is used to connect Wireless
Routers and Access points together to extend a network.
Click on the Drop
down menu next
to 'Bridge Mode'
to select either:
(insert 9630_WDS.tif)
Disabled:
To disable Wireless Bridging (default)
Manual:
To enter the wireless MAC address(es) of the Access Points to bridge with, manually.
1
Wireless channels must match between Router and AP.
2
Security settings (WEP) must match between Router and AP.