Belkin G Plus User Manual page 31

[insert 9630_WPA.tif]
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
[The following section is copied from
WPA2 Requirements
IMPORTANT: In order to use WPA2 security, all your computers and wireless client adapters
must be upgraded with patches, driver, and client utility software that supported WPA2. At the
time of this User Manual's publication, a couple security patches are available, for free download,
from Microsoft. These patches work only with the Windows XP operating system. Other operating
systems are not supported at this time.
For Windows XP computer that does not have Service Pack 2 (SP2), a file from Microsoft
called "Windows XP Support Patch for Wireless Protected Access (KB 826942)" is
available for free download at http://support.microsoft.com/?kbid=826942
For Windows XP with Service Pack 2, Microsoft has released a free download to update
the wireless client components to support WPA2 (KB893357). The update can be
download from: http://support.microsoft.com/default.aspx?scid=kb;en-us;893357
IMPORTANT: You also need to ensure that all your wireless client cards / adapters support
WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin Wireless
cards have update driver available for download from the Belkin support site:
www.belkin.com/networking.
Setting WPA2-Enterprise (RADIUS) Settings
If your network uses a radius server to distribute keys to the clients,
use this setting.
1.
From the "Security Mode" drop-down menu, select
"WPA/WPA2—Enterprise (RADIUS)".
2. Select "WPA2-RADIUS" for Authentication
3.
For Encryption Technique, select "AES". This setting
will have to be identical on the clients that you set up
25SS051 New Features Guide]