Belkin GO N300 DB User Manual

Belkin GO N300 DB User Manual

Wireless dual-band travel router

Advertisement

Quick Links

WIRELESS DUAL BAND TRAVEL ROUTER
GO N300 DB
User Manual
F9K1107 8820nt00920uk Rev. A00
English

Advertisement

Table of Contents
loading

Summary of Contents for Belkin GO N300 DB

  • Page 1 WIRELESS DUAL BAND TRAVEL ROUTER GO N300 DB User Manual F9K1107 8820nt00920uk Rev. A00 English...
  • Page 2: Table Of Contents

    Initial Setup ..........1 Belkin International, Inc., Limited 2-Year Product Warranty ..16 Manual Setup Using Your Browser .
  • Page 3: Getting Started

    gETTing sTaRTED What’s in the box initial setup 1. Connect your Router to the Ethernet (network) connector in Wireless Dual-Band Travel Router your hotel room. (You may use either the cable provided by the hotel or the cable provided with your Travel Router.) Carrying Case Ethernet Cable Power Supply with UK and EU adapters...
  • Page 4 gETTing sTaRTED 3. Connect the power adapter to the Travel 2. If you purchased your Travel Router in Europe or Asia, it shipped Router using the provided cable. with adapters for the various plug types in your region. Please attach the appropriate plug type to the power adapter.
  • Page 5: Manual Setup Using Your Browser

    gETTing sTaRTED Manual setup Using Your browser 4. Plug the power adapter into the wall to start up your Travel Router. In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1”...
  • Page 6: Getting To Know Your Router

    gETTing TO KnOW YOUR ROUTER front Panel b) Wi-fi Protected setup (WPs) light and button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, refer to the Router’s web interface.
  • Page 7: Back Panel

    gETTing TO KnOW YOUR ROUTER back Panel Reset button There is a reset button on the bottom of the Router, which can be depressed using a paper clip or other small object. You may use this button if you need to reset the Travel Router for some reason.
  • Page 8: Technical Details

    TEChniCal DETails Technical features system Requirements • Broadband Internet service with RJ45 Ethernet connection Wireless standards with link Rate: • At least one computer with: • IEEE 802.11n (up to 150Mbps*) • IEEE 802.11g (up to 54Mbps*) Installed wireless network interface card and TCP/IP protocol • IEEE 802.11a (up to 54Mbps*) • IEEE 802.11b (up to 11Mbps*) Windows XP 32 (SP3 or greater), Windows Vista 32/64, ®...
  • Page 9: Using Your Router

    “http://” or “www”). Then press the Enter key. setup steps: 1. Locate and download the firmware file from the Belkin support site. (Type your part number into the search box in the top right corner and look for “Firmware” in the title.) 2.
  • Page 10 Using YOUR ROUTER 7. Click on “Firmware Update” toward the 9. Select the firmware file by left-clicking on it and then click bottom of the left-hand menu. the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface. 8.
  • Page 11: Resetting The Router

    Using YOUR ROUTER Resetting the Router 10. Click the “Update” button. Reset button The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings.
  • Page 12: Restoring The Router To Default Settings Using The Web Interface

    Using YOUR ROUTER Restoring the Router to Default 4. Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading. settings Using the Web interface symptoms You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings.
  • Page 13 Using YOUR ROUTER 6. A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK.” 7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. note: This may take several minutes.
  • Page 14: Troubleshooting, Support, And Warranty

    TROUblEshOOTing, sUPPORT, anD WaRRanTY Troubleshooting My wireless network performance is slow, inconsistent, suffers from weak signal, or i’m having difficulty maintaining a VPn connection . Wireless technology is radio-based, which means connectivity i can’t connect to the internet wirelessly . and the throughput performance between devices decreases when the distance between devices increases.
  • Page 15 TROUblEshOOTing, sUPPORT, anD WaRRanTY limiting the wireless transmit rate i am having difficulty setting up WPa security on my Router . Limiting the wireless transmit rate can help improve range and 1. Log in to your Router by visiting http://router/ with your web browser. connection stability.
  • Page 16 TROUblEshOOTing, sUPPORT, anD WaRRanTY i am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router . 1. Log in to your Router. Visit http://router/ with your web browser. Click on the “Login” button in the top right-hand corner of the screen.
  • Page 17: Technical Support

    NORWAY 81 50 0287 www.belkin.com/uk/networking/ POLAND 00800 - 441 17 37 www.belkin.com/uk/networking/ You can find technical-support information on our website, www.belkin.com, by navigating to the tech-support section. PORTUGAL 707 200 676 www.belkin.com/uk/networking/ RUSSIA 495 580 9541 www.belkin.com/networking/ If you want to contact technical support by phone,...
  • Page 18: Belkin International, Inc., Limited 2-Year Product Warranty

    What is not covered by this warranty? 2-Year Product Warranty All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
  • Page 19 Belkin reserves the right to review the damaged Belkin product. Some states do not allow limitations on how long an implied All costs of shipping the Belkin product to Belkin for inspection warranty lasts, so the above limitations may not apply to you.
  • Page 20: Regulatory Information

    ElECTROMagnETiC COMPaTibiliTY Rules. These limits are designed to provide reasonable protection We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa against harmful interference in a residential installation. Vista, CA 90094, declare under our sole responsibility that the device, f9K1107, complies with Part 15 of the FCC Rules.
  • Page 21: European Compliance Statement

    EC, and the Low Voltage Directive 2006/5/EC. Conformity was assessed using a Technical Construction File. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.com/doc For information on product disposal please refer to http://environmental.belkin.com...
  • Page 22 © 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS and Safari are trademarks of Apple Inc., registered in the U.S.

This manual is also suitable for:

F9k1107

Table of Contents