Printing In Two Colors - Ricoh VT2240 Operating Instructions Manual

Printing in two colors

After printing in one color, you can print in another color on the same side of
the print.
You cannot print in two colors at one time.
Leave the prints for a while before printing on them again to let the ink dry.
1
Prepare the two originals. Set the
first original on the exposure
glass.
2
Make sure that Master Making
indicator is lit and then press the
Start key. Check the image posi-
tion of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys ( see page 21) or the side
plate fine adjusting dial (
22).
3
Enter the number of prints using
the Number keys.
4
Make sure that Print indicator is
lit and then press the Start key.
see page
OPTIONAL FUNCTIONS
92