Table of Contents
Advertisement
OPTIONAL FUNCTIONS
Originals
The following types of originals are not recommended for use with the optional
document feeder. Set these types of originals on the exposure glass.
• Originals heavier than 90 g/m
• Originals lighter than 50 g/m
• Originals heavier than 120 g/m
• Originals lighter than 40 g/m
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148 mm x 105 mm, 5.8" x 4.1"
• Originals larger than 257 mm x 364 mm, 10.2" x 14.4"
• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the Paste Shadow Erase key. If the thickness of the
paste-up original is more than 0.1 mm, and the space between the pasted parts
is less than 2 mm, 2/25", a shadow might appear on the prints.
The first 5 mm, 0.2", of the leading edge cannot be printed. Make sure the
leading edge margin is at least 5 mm, 0.2".
83
2
2
Original
2
, 23.9 lb (when setting a stack of originals)
, 13.3 lb (when setting a stack of originals)
2
, 31.9 lb (when setting one original at a time)
, 10.6 lb (when setting one original at a time)
5 mm, 0.2"
Print
Advertisement
Table of Contents
