Table of Contents
Advertisement
Setting originals into the document feeder
If you set one original into the document feeder while another original is still on
the exposure glass, the original set into the document feeder will be scanned
first.
1
Adjust the original guides to the
size of the originals.
2
Insert the originals face up in the
document feeder until it stops.
Do not insert different size originals
at the same time.
Approximately 30 originals can be in-
serted at one time in the document
feeder. The top original will be fed
first.
The guides must fit snugly against
both sides of the stack.
3
Set the required image settings.
4
Make sure that Master Making
indicator is lit and then press the
Start key.
5
Make your prints.
OPTIONAL FUNCTIONS
84
Advertisement
Table of Contents
