Printing From Several Originals At Once (Auto Cycle) - Ricoh VT2240 Operating Instructions Manual

OPERATION
Printing From Several Originals At Once
(Auto Cycle)
Use the Auto Cycle key to process masters and make prints at one stroke.
When you use the optional document feeder, it is not necessary to place origi-
nals one by one. All originals are fed and prints are completed after you press
the Start key.
If you use the optional tape dispenser, the tape dispenser drops a strip of pa-
per onto the top of the paper stack after the last page of each printing set is
fed out to the paper delivery table. This marks the end of each printing group.
1
Set the original on the exposure
glass or in the optional document
feeder.
You can set up to 30 originals into
the optional document feeder.
2
Press the Auto Cycle key.
Both indicators of Master Making
mode and Print mode are lit.
If you press the Auto Cycle key, you
cannot make proof prints by pressing
the Proof key.
3
Enter the number of prints using
the Number keys.
4
If you use the optional tape dis-
penser, turn on the power switch
of the tape dispenser.
45