Table of Contents
Advertisement
1
Select the desired enlargement
ratio using the Enlarge key.
If you want to return the ratio to 100
%, press the Full Size key.
2
Make sure that the original and
the print paper are the correct
size.
3
Set your originals on the expo-
sure glass or in the optional
document feeder.
4
Make sure that Master Making
indicator is lit and then press the
Start key. Check the image posi-
tion of the trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys (
see page 21) or the side
plate fine adjusting dial (
22).
5
Enter the number of prints re-
quired using the Number keys.
6
Make sure that Print indicator is
lit and then press the Start key.
see page
OPERATION
30
Advertisement
Table of Contents
