Printing In Two Colors - Ricoh PRIPORT JP730 Operating Instructions Manual

H
Lower the drum unit lock lever.
I
Close the front door.
Note
❒ Make sure that the Cover Open
indicator (M) turns off.

Printing in Two Colors

After printing in one color, you can
print in another color on the same
side of the print.
Important
❒ Allow the prints to dry for a while
before printing the second color.
❒ If the prints are still wet when you
print on them again, the paper feed
roller might become dirty. In this
case, wipe off the roller with a
cloth.
Note
❒ You cannot print in two colors at a
time.
Color Printing Using the Optional Color Drum
A
Prepare two originals. Place the
first original in the document
feeder.
R
P
B
Press the {Master Making} key.
C
Check the image position on the
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the {Image
Position} key (see p.18 "Shifting
the Print Image Position For-
wards or Backwards") or by
moving the position of the pa-
per (see p.19 "Shifting the Print
Image Position to the Right or
Left").
R
2
P
GRCOLO0E
35