Troubleshooting - Ricoh FAX2500L Operator's Manual

3. TROUBLESHOOTING

Call Progress Signals (CPS)
Sometimes, a Call Progress Signal and an error message will appear on the dis -
play panel. Possible messages are as follows.
DIALLING
REMOTE TERMINAL BUSY
WRONG NUMBER
LINE NOT AVAILABLE
FAX NUMBER CHANGED
REMOTE FAX REJECTED
UNABLE TO CONNECT
NO RESPONSE
NETWORK BUSY
CLASS INCOMPATIBLE
CHECK INTERFACE
To remove the message from the display, make sure that the Communicating indi -
cator is not lit, then press
The machine is dialling; do not
press Stop.
Try again later.
Check the number, and check that G3
or G4 was correctly selected.
Then redial.
Try again later.
Find out the new fax number.
Contact the user at the other end.
Try again.
Try again.
Try again later.
The other terminal's signalling mode
is not compatible with yours, and the
message cannot be sent.
Check that the ISDN line cord is
connected properly. Then try again.
Stop .
APPENDIX C. ISDN OPTION TYPE 40
C-6